|
LightAV.com
Price
|
Click for larger
picture
|
Description
|
Retail
Price
|
MRC44KPW
LCD Keypad for MRC 44 System
US $Call
|
|
- LARGE, EASY-TO-READ LCD
SCREEN PROVIDES VISUAL CONFIRMATION OF SOURCE STATUS & SOURCE FEEDBACK
- ALL BUTTONS ARE BACKLIT
FOR USE IN LOW LIGHT
- PROVIDES IR PASS-THROUGH
- Available in White, Black,
Ivory, and Almond
|
$ |
MRC88KPW
LCD Keypad for MRC 88 System
US $Call
|
|
- LARGE, EASY-TO-READ LCD
SCREEN PROVIDES VISUAL CONFIRMATION OF SOURCE STATUS & SOURCE FEEDBACK
- ALL BUTTONS ARE BACKLIT
FOR USE IN LOW LIGHT
- PROVIDES IR PASS-THROUGH
- Available in White, Black,
Ivory, and Almond
|
$ |
SPLCD39G
SPLCD57G
US $Call
|
|
- SPLCD39G SmartPad LCD™ 3.9” Graphic Touchpanel
- • 3.9” diagonal, 320 x
240 pixels, 256 colors
- • USB and RS232 programming
interfaces
- • Built-in IR code library
- • Built-in keypad IR receiver
- • Stand-alone device to
output IR and/or RS232 commands
- • Programmable via Dragon
Drop-IR™ software
- SPLCD57G SmartPad LCD™ 5.7” Graphic Touchpanel
- • 5.7” diagonal, 320 x
240 pixels, 256 colors
- • USB and RS232 programming
interfaces
- • Built-in IR code library
- • Built-in keypad IR receiver
- • Stand-alone device to
output IR and/or RS232 commands
- • Programmable via Dragon
Drop-IR™ software
|
$ |
SPLCD64G
SPLCD64V
US $Call
|
|
- SPLCD64G SmartPad LCD™ 6.4” Graphic Touchpanel
- • 6.4” diagonal, 640 x
480 pixels, 64K colors
- • USB and RS232 programming
interfaces
- • Built-in IR code library
- • Built-in keypad IR receiver
- • Stand-alone device to
output IR and/or RS232 commands
- • Programmable via Dragon
Drop-IR™ software
- SPLCD64V SmartPad LCD™ 6.4” Digital Video
Touchpanel
- • 6.4” diagonal, 640 x
480 pixels, 64K colors
- • Digital video display
and video PIP capability
- • USB and RS232 programming
interfaces
- • Built-in IR code library
- • Built-in keypad IR receiver
- • Stand-alone device to
output IR and/or RS232 commands
- • Programmable via Dragon
Drop-IR™ software
|
$ |
730-00
SmartPad Keypad
US $Call
|
|
- *
Normal 3-wire IR receiver system compatible.
- * Internal
microprocessor learns IR commands. 20 keys in a dual gang decorator-style
J-Box.
- * 4
keys are dedicated to bank switching.
- * 16
keys initiate learned IR commands.
- * 10
command sequencing available on all 16 keys.
- * LED’s
indicate which bank is selected.
- * Available
in Black, White and Ivory.
- *
Specifications
- * Memory
ROM capacity: 8 kbytes
- * IR
Carrier Frequency: 21.74 kHz to 62.50 kHz
- * Power:
12V DC, 50 mA. Requires a 781RG or 782 Power Supply.
- * Connectors:
3-screw terminal block.
- * Decorator-style
wall plate not included.
- * Dimensions:
2-11/16" H x 3-7/8" W x 1-9/16" D (69mm x 99mm x 40mm)
- * Requires
SLB-2 two-gang box for existing construction.
|
$ |
SmartPad3
US $Call
|
|
- *
The first keypad with the ability to be assigned individual addresses for
network cloning.
- * The
SmartPad3 series features a unique addressable network cloning system that
allows common AND unique codes for individual pads to be cloned in one simple
operation on the network from one central location.
- * The
first keypad to protect its microprocessor from a 20,000 volt static discharge
with a write/protect switch.
- * SmartPad3
expands on the SmartPad2’s ability to accept bank tracking commands.
- * SmartPad3
has the ability to mute individual rooms by pushing a button, allowing the
installer to determine if rooms will mute individually or in groups. (Individual
room mute or whole house mute.)
- * SmartPad3
now gives the installer dual layers on every button for true “push and hold”.
Holding any button down for more than one second will send out a different
group of commands.
- * SmartPad3
is supported by Dragon Drop-IR v4. This software shows the installer exactly
what he is doing with each series of commands when programming a SmartPad3.
- *
Memory: LM110 - 8 kbytes E2PROM
- * PM110
- 32 kbytes E2PROM
- * IR
Carrier Frequency: 31.25 kHz to 71.50 kHz
- * Power
Requirements: 12V DC (75mA without STATUS, 85mA with STATUS)
- * Requires
Xantech 782 Power Supply.
- * Connector:
4 screw terminal block; +12V, STATUS, GND & IR OUT
- * Conductors:
Normal 3-wire Xantech IR receiver system compatible. (4th wire for STATUS
indication)
- * Cable
Requirements: Four-conductor/24 gauge up to 150’, 22 gauge up to 400’, 20
gauge up to 1500’ and 18 gauge up to 4000’ (unshielded OK).
- * Maximum
Peak IR Signal Output Current: 100 milliamps
- * STATUS
Terminal Power Management Turn-on Voltage: 5 - 20 volts DC (8 mA @ 12V DC)
- * COM
Port: RS232 Signal Compatible
- * Speaker
Relay: Stereo Speaker Pair Muting, Contact Rating: 2 Amps/30V DC (will handle
amplifiers rated up to 100W/channel), IR Commands: ON, OFF, TOGGLE (RC68+
Code).
- * 8
Different Key Modules Available
|
$ |
Dragon Drop IR Software
US $Call
|
|
- *
Programs an entire array of products. The SmartPad2, SmartPad3, the new URC-2
Hand-Held Controller and WaterPad, the world’s first submersible keypad.
- * All
of the latest upgrades for learning most IR codes currently in use. (Excludes
high frequency carrier codes. Call Xantech regarding converters for these
codes.)
- * Create
virtual keypads and hand-held controllers on your PC monitor. Create single,
dual or triple-gang keypads for the SmartPad3, or program all the functions
you need for the new URC-2.
- * Creating
and editing codes are a snap with DD4. Create sequences, edit, change code
sequencing, insert new code functions & time delays, even “push &
hold” functions, all on the PC. Test the codes and then transfer this program
to the SmartPad3, URC-2 or WaterPad.
- * Includes
the PCIR ‘E’ version & DD4 software on CD ROM.
- * Requires
Windows® 3.1, 95 or 98.
- * International versions
available. Call for additional information.
- DD4 UPGRADE - UPGRADES
PREVIOUS VERSIONS TO DD4
- * Includes
DD4 CD ROM, PCIR 'E' upgrade and a DD4 owner's manual.
- * PCIR requires an RA#
for processing.
|
$ |
WPK WaterPad
US $Call
|
|
- *
Waterproof version of the SmartPad2.
- * Features
waterproof buttons and electronics.
- * Must
be programmed with the Dragon Drop-IR software and hardware package.
- * Can
be configured with individual icon labels to suit the user’s needs.
- * Can
be used in kitchens, showers, outdoors or poolside.
- * Available
in 4 configurations:
-
WPK1 - learning module w/ 20 function buttons.
-
WPK4 - learning module w/ 4 bank & 16 function buttons.
-
WPK6 - learning module w/ 6 bank & 14 function buttons.
-
WPK8 - learning module w/ 8 bank & 12 function buttons.
- *
Memory: 8 kbytes E2 PROM
- * IR
Carrier Frequency : 20 kHz to 95 kHz.
- * Power:
12V DC, 70mA (85mA w/status). Requires Xantech 781RG or 782 Power Supplies.
Normal 3-wire Xantech IR receiver system compatible (4th wire for status
indicators and power management).
- * Connection:
6 ft., 7 conductor cable; +12V, Ground, Signal, Status and 3 wires for
RS232 programming.
- * Status
Terminal Power Management Turn-on: 5 to 20 volts DC.
- * Maximum
Current Output: 100 milliamps
- * All
WaterPad versions will fit in two-gang wall boxes for both new and existing
construction.
- * Decorator-style
wall plate included.
- * DD4 software required.
|
$ |
<
>