HD62US
6.5" 2-Way Braxial
US $481.25
HD62US/M6
6.5" 2-Way Braxial
US $519.95
|
|
- • Midrange: 6.75" Cast
alloy carbon treated cone.
- • Crossover: ES-200US “Transient
Optimized” Elliptic 4th order 2-way with Built-in UpStage design.
- • Mounting depth: 2 3/4”
- • UpStage Tweeter: DRT-26
extended range modular 1” silk Tweeter.
- • Aluminum and titanium
twtr drivers optional.
- • Power handling: 200 watt
RMS @ 100Hz High Pass.
- • Frequency response: 65-20kHz.
- • Sensitivity: 92.6 dB.
- • Impedance: 4 Ohm.
- • Surface & flush mount
Tweeter for UpStage mount.
- • Main Tweeter: DRT-25 extended
range 1” silk Tweeter.
- • Flush angled mount included.
- The Complete UpStage
System components:
- The speakers in any system
establish the basis for the quality of sound. After all, if the speakers themselves
aren't of the best quality by design -the music, no matter how pure, will
get lost in the transfer. Good speaker engineering doesn't happen by accident.
The CDT drivers are no exception. The first aspect to examine is the moving
parts of the speaker. The cone, spider, surround, and voice coil. The cone
of the CDT midrange drivers is made of a light, yet rigid, carbon treated
paper.
-
- It's made with a special
Compound Curve design to allow for the proprietary CDT or Contoured Dispersion
Technology that is unique to the ?CDT System drivers. Besides the special
cone design, the drivers also use highly damped butyl rubber surrounds to
reduce vibration from the frame, as well as allow for precise and linear excursion
of the cone. At the bottom of the cone is the other suspension component,
the spider. We use a flat spider design to allow for more precise movement
and return of the aluminum voice coil assemblies during critical transients,
- In fact, our midrange speakers
are so efficient, they can play much higher into the midrange frequencies
than almost ANY OTHER CAR SPEAKER! Smooth response to 7kHz - 6 1/2 octave!
- This makes the blend between?
the midrange and the Tweeter seem almost transparent because it's beyond the
troubled range of 2- 4kHz where most systems are plagued with phasing problems
between both speakers at the crossover point. The CDT drivers also have an
equally impressive number of non-moving parts - the frame, magnet, and top
plate.
- The frame is made from a
magnetically resistant cast aluminum which has both unparalleled strength
and heat dissipation capabilities.
- The top plate design, along
with the precision ground, grain-oriented barium ferrite magnet assemblies,
keep the electrical energy focused in a controlled area of the magnetic
gap. All of these things help keep the precise movements of the cone linear
and correct.
- These help to create the
Contoured Dispersion Technology that makes such an audible difference, producing
unrivaled midrange that is engineered just for your car - certainly one
of the toughest challenges of any car speaker system. The CDT DRT-25 Tweeters
are also unique. They are a 25 mm (1") silk ?dome design with a neodymium
magnet and ferrofluid filled voice coil gap to give sound and power handling
that typically requires a much larger speaker. This, along with the unique
"Phase Perfect" 60 dB. high-definition passive crossovers and the extended
midrange response of the midrange drivers, provides a Tweeter that is sweet
sounding, yet powerful - in a small, unobtrusive package.
-
- The Complete UpStage ES-200US
2-way xover:
- This compact “silver bullet”
module implements the image enhancing StageFront Technology Upstage system
while holding complexity to an absolute minimum. This versatile crossover
module implements a two-way crossover with large high quality parts or alternately
may be programmed to drive an upstage high-mounted second Tweeter. This
dual functionality is jumper selectable. In simple two-way mode the tapped
inductor design in the Satnet 560 is used. Dual jumpers moved together change
the crossover to upstage mode. In the upstage mode the drive to the mid-woofer
and Tweeter are tapered off to interface with the upstage Tweeter. This tapering
is adjustable with three “L” settings and two “C” settings. This alters the
crossover frequency and response shape (damping). The image Tweeter furthermore
has seven selectable levels available. Upstage crossover is typically at 8kHz.
Main Tweeter crossover is transient optimized at 3.7kHz. No protectors are
used.
- The Complete UpStage
Modular Quick Connect Imaging Tweeter Characteristics:
- The three modular imaging
UpStage Tweeters are provided with special mounting options for installation
in doors, on the dash and the A-Pillar area.
- These are available in any
or all of three types:
- A. Silk
- B. Aluminum
- C. Titanium
- Each type has slightly different
qualities. All are virtuous but there is a different emphasis.
- The Silk dome is the smoothest.
Always gentle and forgiving, this Tweeter emphasizes the music and avoids
noise and artifacts that may embed some source material or be characteristic
of less than perfect amplifiers. Very low listening fatigue and an easy
quality that puts an emphasis on the system’s midrange.
- The Aluminum is more aggressive
at retrieving fine detail. Cleaner and more revealing than the silk but
more critical also. The lower end (in a Tweeter) is perhaps the lowest in
distortion. The all-around choice.
- The Titanium is the speed
demon. For those who demand the maximum air and energy the Titanium takes
the top end into the violet. Very critical and revealing of high end details.The
trio may be snapped into the same housing for an instant A-B.
- 4 Year warranty from Authorized
Dealer
|
<
>
